PY600-MLA(AC Sliding Motor Control Board)

J2 Terminal (as per Figure 2):

Terminal 6: External Push Button Pedestrian Switch

Terminal 5: External Open/Stop/Close/Stop Loop Control Push Button (Repeated Open/Stop/Close)

Terminal 4: Common Terminal for All External Control Push Button

Terminal 3: External Stop Push Button Switch.

Terminal 2: External Open Push Button Switch.

Terminal 1: External Close Push Button Switch.

J5 Terminal: Limit Switch and Accessories

Terminal 13: Open Limit Switch

Terminal 12: Limit Switch Common Terminal

Terminal 11: Close Limit Switch

Terminal 10: Loop Detector Connector (Pre-wired by Factory)

Terminal 9: Ground/Earth (GND)

Terminal 8: Photocell input (N.C.). If no photocell is fitted, use a jumper between terminals 8 & 9.

Terminal 7: Power supply for accessories (+15V)

J6 Terminal:

Motor Capacitor

J4 Terminal:

MOT1: Motor Terminal, swap with MOT2 to change gate moving direction.

MOT2: Motor Terminal, swap with MOT1 to change gate moving direction.

MOTCOM: Motor Common Terminal.

LAMP (L&N): Connection for warning lamp.

PE: Motor and warning lamp earth

Note: If require to change the moving direction, not only MOT1 and MOT2 wires need to be swapped, but also the wires of 11 and 13 on J5 Terminal have to be swapped with each other.

J3 Terminal: 220VAC

PE: Earth (yellow/green wire).

L：Live(brown wire).

N：Neutral(blue wire)

Hot Tags: py600-mla(ac sliding motor control board), China py600-mla(ac sliding motor control board) manufacturers, suppliers, factory, YS422-66, PY600 MLA AC Sliding Motor Control Board , GASL800DC DC Sliding Motor Control Board , RT18 Wireless Keypad, 0 5m Galvanized Gear Rack, RT82